Savings upgrade from Mechanical to Electronic Switches

Posted on March 29, 2021 by Mark McCabe in: Safety | Smart Switches | Technology

Many times, when specifying replacement switches I&E technicians may feel most comfortable replacing “like-with-like”, and stick with mechanical switches.

Users may be acclimated toward electromechanical switch maintenance and may not be fully  aware of the hidden maintenance costs vs. those associated with an electronic switch serving the same function.

Electromechanical switches are built from an array of moving parts including mechanical switch contacts, adjustment screws, plungers, springs, and more, leaving  little room for error before a switch failure. Many ways a switch can fail include, but are not limited to: sticking parts due to media buildup; shifting set point adjustments from vibration or temperature changes; or contact corrosion over time.  Regular maintenance is required to detect these issues.

These maintenance hours can be costly, and multiplied by the quantity of mechanical switches present at a site, add up quickly.   If a permanent failure occurs, such as corroded contacts, then the replacement of the mechanical switch will include costly downtime in addition to the maintenance hours.

Electronic switches on the other hand, do not contain any moving parts that wear over time, and since all set point adjustments are programmed electronically, calibration is less affected from vibration and temperature changes. Also, contact corrosion is no longer a concern because there are no physical contacts in electronic switches which use a solid-state relay.  And with smart, electronic switches, if faults do occur, the display will show an error code explaining which error had been detected.  This identifies the specific device with the problem, and identifies what the I&E technician needs to fix to reverse the fault and get the switch operational.

United Electric Controls’ ONE Series smart, electronic switch can help keep maintenance and costs to a minimum.

Pressure spikes can often cause erroneous setpoint trips. These unwanted trips interrupt the process and might even trigger maintenance requests. Typically, the user would install a mechanical dampener in line with their electromechanical switch, to prevent these false trips.  Now, an I&E technician needs to maintain two mechanical products.

One of the features of the ONE Series smart, electronic switch is the Filter mode that will electronically dampen pressure spikes to prevent any erroneous trips.  This is now achieved with one device and saving the maintenance on two mechanical devices.

There are other maintenance-friendly features included in the One Series smart, electronic switch, such as Plugged Port mode and Window mode. You can learn more about those here .

In conclusion, there are many ways upgrading to the ONE Series could help cut unnecessary, hidden maintenance costs when using electromechanical switches, and in addition, increasing reliability and performance efficiencies. Contact one of our sales application engineers to discuss your upgrade.  +1 (617) 923-6977.

About the Author: Mark McCabe, Sales Applications Engineer 

Mark McCabe has been with UE for just over 2 years. He is the Sales Applications Engineer focusing mainly on the One Series Smart Electronic Switch and Transmitter.


Leave a Reply

Your email address will not be published. Required fields are marked *

Ask an Expert

Ask An Expert

Business hours are M-F, 8-4:30 EST.
We strive to respond in less than 24 hours.
Please contact us at +1 617 926 1000 for immediate assistance.

United Electric Controls will not send you unwanted email or provide your email address to third parties